The key role of led linear batten for workshop is lighting and decorative design, which is mostly used in the hotel restaurant hall, hotel rooms, restaurant bar, restaurant and other venues. In addition, It is also often used in car decoration, performance stage decoration design, urban architectural decoration design, advertising decoration, movie theater and its public facilities in the city lighting. It can be seen that led linear batten for workshop has fully mobilized the role that can not be underestimated in today's society.

led linear batten for workshop Details on installation key points

Key # 1: Get the necessary materials ahead of time

led linear batten for workshop Installation points

The raw materials must be used are led linear batten for workshop, driving power supply, multi-strand copper core flexible wire and glass glue, before installation need to convert the mains into a safe DC voltage consistent with the driving power supply working voltage.

Essential two: do a good job of routine inspection

led linear batten for workshop Installation points

First, regularly check the trial switching power supply and light strips, to ensure that they are not more damaged in the process of logistics transportation, then, calculate the output power of the switching power supply, to clear how many meters of light strips must be connected to a power supply, then, clear the best wiring implementation plan, so that access wire shortest, wiring work is very simple.

Key point 3: DC power connection method

led linear batten for workshop Installation points

led hard light strip through the main power switch after connecting the fireline, N connected to the neutral line, +V connected to the red line of the light strip, -V connected to the black line or black and red line, +V and -V connected anti is not easy to cause the destruction of the light strip, everyone do not worry.

Key point four: DC power connection method

led linear batten for workshop Installation points

Dc power supply has two kinds of connection method in series and parallel, need to pay special attention to is, if the choice of connecting method, proposed route length does not exceed 3 meters, if it is beyond 3 meters, must be from the DC power terminal from the new wiring, otherwise there will be light strip behind the problem of not bright enough.

Key five: the selection of lamp power

The connecting wire is the need for power, therefore, the electrical power of the lamp strip is best not to exceed 80% of the rated power of the DC power supply, 72 beads cabinet small table lamp strip for 17.2 watts per meter.

Key Point six: Pay attention to the installation environment

led linear batten for workshop has normal heat dissipation function, but if in the dusty site, it is easy to cause dust to cover the radiator, affecting the normal heat dissipation of led linear batten for workshop. In addition, The specific location of the installation can not have water vapor, smoke and other substances, because the lamp body itself has a small gap, this material is easy to enter, more serious will affect the normal work of the lamp strip, if can not prevent, propose to do a good job of protection measures.

led linear batten for workshop installation key points are introduced, I hope you can keep these key points in mind, can be used in the actual installation work.

led linear batten for workshop https://www.zliec.com/Workshop-led-lights-have-obvious-advantages-and-are-more-than-worth-buying.html