On an HP printer, an error notice titled "Hp 10.1000 Supply Memory Error" displays when you try to print or scan something. This problem often occurs when the metal contacts or chip on the toner cartridge don't make a secure connection to the matching connections inside the printer. The inability of the printer to recognise the inserted toner cartridge results in the display of the error message "Supply Memory Error." This irritating circumstance can be too much to handle for someone who wants some prints right away. As a result, calling the HP Support Number immediately is highly recommended because top tech specialists are available there 24/7. Here, you will find more detailed information. Therefore, take a quick look at this website!

The Hp Printer Supply Memory Error: What Causes It?

There are several possible reasons of the HP Printer Supply Memory Error problem, including the ones listed below:

• This mistake occurs as a result of a missing package, a paper jam, or difficulties removing the protective strips.
• This issue also develops if the toner cartridge is not attached to the pressed metal contacts within the printer.
• Due to cracked plastic parts, the toner could not be in the proper place.
• because to the use of outdated printer firmware or software
• This problem might also appear if you use a new toner cartridge instead of an empty one.

How to Successfully Repair HP 10.1000 Supply Memory Error

To get your printer back in working order, try the following fixation:

Solution 1: Misplaced package or protective strips

For fitting a brand-new toner cartridge, there are plastic clips and an orange protective strip. This protects the cartridge from damage during transit. Before starting to instal a new toner on the printer, all of the plastic clips and the protective strips across the drum must be removed. Otherwise, you might not be able to use these materials with your HP Printer to print. Clips are noticeable because they can be used to promote so easily. Pull the orange ring that surrounds the protective strip, which is situated on the toner's side. When you print, scan, or fax any document after doing this, there won't be any problems displayed on the printer screen panel.

Solution 2: Compressed metal contacts.

Recognizing a toner cartridge that has been installed requires connecting two small metal contacts to the corresponding contacts on the toner cartridge. The metal still communicates with the printer and the contacts on the toner that have completed a circuit even if the contacts aren't making contact. The absence of toner will then be discovered by your printer. Remove the toner cartridge from the printer, then look inside to see if there are any objects that resemble a microchip or two metal squares. Then look at the connectors that correspond to the spots within the printer where these would attach. If the two metal connectors seem to be squeezed together at the rear, carefully pull them apart to prevent destroying anything. This will make it possible for them to properly connect to it after the toner has been loaded. Before installing a new toner, make sure there are no paper jams because it is also feasible that misplacing parts of packing or paper jams might create an issue.

Method 3: Broken Plastic Pieces

If the toner cartridge is harmed by one of the sides, the plastic slots may be harmed as well. If this happens, the toner may not be placed in the printer's real toner slots. The contacts also won't connect correctly, which is similar to the earlier reason for the HP 10.1000 Supply Memory Error. The only way to fully resolve this issue is to replace the toner cartridge with a fresh one.

Solution 4: Outdated firmware and software

Every time, the company that makes HP printers provides updated printer software or firmware. Therefore, if the printer software becomes outdated, you may see an HP 10.1000 Supply Memory Error. To overcome this problem, all you have to do is go to Google. Type "[your printer model] firmware" to get the latest up-to-date firmware for your PC or printer. The supply memory issue is typically fixed when the software or firmware is properly upgraded. You can find the most recent firmware updates on the HP website. The last possible reason of the supply memory problem might be the installation of a compatible or remanufactured toner cartridge with out-of-date data recorded in the cartridge's microcontroller. The notice of error The printer firmware may then display Supply Memory Error. To resolve this problem, the reman from the firm must be replaced. Replace it in your printer after that.

Hopefully! The HP 10.1000 Supply Memory Error has been resolved with the aid of the aforementioned fixes. However, if anyone is still having trouble, please contact HP Customer Service immediately away for a one-stop fix. The technological crew is highly skilled and knowledgeable. As a result, your issue will be fixed quickly!

References: Hp Printer Supply Memory Error