If you own a Hyundai car, then you know how important it is to keep your vehicle in good working condition. One crucial part of ensuring that your Hyundai runs smoothly and safely is by keeping the brakes in excellent shape. Over time, brake pads wear down, and they need to be replaced. If you're looking to save money on this routine maintenance task, then you can replace your Hyundai's brake pads yourself. This step-by-step guide will walk you through the process of how to replace Hyundai brake pads at home.

Before You Start

Before you get started, make sure you have all the necessary tools and equipment on hand. You'll need a lug wrench, a socket wrench set, a C-clamp, a jack, and jack stands. You should also have a pair of gloves, eye protection, and a clean cloth. Additionally, you'll need to purchase new brake pads and brake cleaner spray.

Step 1: Prepare Your Vehicle

Before you start replacing the brake pads, make sure your Hyundai is in a safe and stable location. Park your car on a level surface, set the parking brake, and turn off the engine. Use a lug wrench to loosen the lug nuts on the front or rear wheels (depending on which brake pads you're replacing) but don't remove them yet.

Step 2: Jack Up Your Car

Next, use a jack to lift your Hyundai off the ground. Place jack stands underneath the car to ensure it doesn't fall while you're working. Once the car is securely in place, remove the lug nuts and take off the wheel.

Step 3: Remove the Brake Caliper

To access the brake pads, you need to remove the brake caliper. Use a socket wrench to remove the bolts that hold the caliper in place. Then, carefully pull the caliper away from the rotor. Don't let the caliper hang by the brake line because it can damage the line.

Step 4: Remove the Old Brake Pads

Once you've removed the brake caliper, you can take out the old brake pads. Gently pull them out of the caliper bracket. If they're stuck, use a screwdriver to pry them loose. Make a note of the position of the old brake pads so that you can install the new ones correctly.

Step 5: Clean the Caliper

Before you install the new brake pads, it's important to clean the caliper. Use brake cleaner spray to remove any dirt, debris, or brake dust from the caliper and the rotor. Make sure the caliper is completely dry before moving on to the next step.

Step 6: Install the New Brake Pads

Now you're ready to install the new brake pads. Apply a thin layer of brake pad lubricant to the back of each pad to prevent noise and vibration. Then, slide the new pads into the caliper bracket, making sure they're in the same position as the old ones.

Step 7: Reattach the Brake Caliper

Once the new brake pads are installed, it's time to reattach the brake caliper. Use a C-clamp to compress the piston back into the caliper. Then, carefully slide the caliper back over the rotor and secure it with the bolts you removed earlier.

Step 8: Reinstall the Wheel

With the brake caliper back in place, it's time to put the wheel back on. Line up the wheel with the studs and tighten the lug nuts by hand. Then, use a lug wrench to tighten them all the way.