We know that in the process of using steel coil slitting machine to process some materials, due to some factors, problems such as burrs, poor width and even side bending may occur. If the requirements for product production accuracy are relatively strict, then certain measures need to be taken in time.

Because during the operation of the steel coil slitting machine, the actual slitting quality is often affected by tools and other components. At the same time, the basic performance of the tool holder must be considered. First of all, during production, if the tool shaft shakes greatly in the axial or radial direction, it may cause the gap and overlap to change, which will inevitably affect the cutting quality of the product. In other words, this may cause burrs, side bends and distortions on the product surface.

These phenomena will reflect the basic performance status of the steel coil slitting machine. Under normal circumstances, during the operation of the tool holder, the bearing temperature of the tool shaft will increase, and the tool shaft will also change due to thermal expansion. This will also have a certain impact on quality. Therefore, when designing and manufacturing the tool holder, this thermal expansion problem should be considered, and the relative difference between the upper and lower shafts should not exceed five microns during the assembly process.

In fact, during the production of steel coil slitting machine, if you want to achieve higher accuracy requirements, you must not only pay attention to controlling the jitter accuracy of the cutter shaft in the axial and radial directions, but also ensure the accuracy of the cutter shaft itself. . For the diameter of the cutter shaft, the inner diameter of the cutter should be kept between 0.01 and 0.015 mm. In other words, the tool axis as a reference also needs to be done.

In addition, the movement function of the knife shaft on the steel coil slitting machine must be ensured. This is because during the operation of the steel coil slitting machine, the position of the shaft shoulder as the reference plane of the knife will change due to the wear of the parts after the operation. Therefore, this issue must be considered in the design.

Wuxi Bangzhou Machinery is professional in designing and producing all kinds plates processing machines. We have the high quality metal slitter for sale. At present, we have own team of design, production and sales. We can provide our customers with one-stop and high quality service. Come and contact with us as soon as possible.